Training Noice Control Management – One possible cause of hearing damages on men is the level of noise exposures that beyond the limit of sound pressure level or percent dose allowed for a normal working hours. Industrial workers, who receive noise exposure in their everyday working environment, are vulnerable to experience hearing damage either in the form of temporary (TTS) or permanent threshold shift ((PTS). Therefore, the industry should establish a professional program of noise control management in order to protect the health and safety of the workers.
In association with Indonesian regulation for safety and healthy working condition (PP No. 3 1975), limit of Leq 85 dBA noise exposure level for 8 hours working day is required for work places. Instead, a Leq limit of 90 dBA steady noise levels for 8 hours working day is determined in OSHA regulation (1974) for occupational noise. Higher levels of noise will reduce the allowable exposure time or working period of workers; therefore, a feasible administrative or engineering noise controls should be applied. When employees are subjected to noise exposures exceeding the limit stated in OSHA regulation, personal ear protectors, such as, earplug or earmuff, shall be provided.
Training Noice Control Management
Objectives Training Noice Control Management
- Learn about noise in industry and the effects of noise to workers.
- Learn about noise measurement and analysis techniques including instrumentation
- Learn how to design, monitor and implementing a management system for preserving health and safety of workers from noise exposure in industry
- Learn how to design, monitor and implementing noise control engineering in industry
Outline Training Noice Control Management
- INTRODUCTION
- FUNDAMENTALS OF ACOUSTICS
Sound Levels and Decibel Scales
Sound Propagation Outdoors and Indoors
Air and Structure borne Sound Propagations - NOISE SOURCES IN INDUSTRY
Fan Noise
Compressor and Pump Noise
Jet Noise
Pipe Flow Noise
Other Noise Sources - NOISE MEASUREMENT AND FREQUENCY ANALYSIS
Measurement Methods
Microphones
SLM and Integrating Devices
Time Varying Noise and Spectrum Analysis
Audiometer - HEARING CHARACTERISTICS
Hearing Mechanism and Threshold of Hearing
Loudness Levels and Computation
Hearing Loss and Audiometric Test - EFFECTS OF NOISE ON HUMAN
Annoyance Levels
Noise Induced Hearing Loss
Noise Dose Calculation - NOISE CONTROL TECHNIQUES
Planning a Noise Control Program
Noise Control by Planning and Maintenance
Enclosure and Barriers
Silencers, Mufflers and Attenuators
Noise Control by Room Treatment - NOISE CONTROL MANAGEMENT
Priority Planning and Approach
Noise survey and Visual Inspection
Noise Abatement Procedures and Guidelines
Hearing Conservation Program
Noise Control Standards and Regulations - TUTORIALS AND PRACTICAL WORKS
Insulation
Noise measurement and frequency analysis
Noise Dose
Participant Training Noice Control Management
Staf, supervisor hingga manajer dari bagian Logistik, Pergudangan, Procurement, PPIC dan Produksi, atau departemen lain yang terkait dengan fungsi persediaan.
Metode Training Noice Control Management
- Presentation
- Discussion
- Case Study
- Simulation
- Evaluation
- Assesment
Formulir Pendaftaran
[RM_Form id=’1′]
Jadwal Training Noice Control Management Terbaru di Jogja, Bandung, Jakarta, Bali, Surabaya, Lombok. Lihat Jadwal Fix Running dan Dapatkan penawaran harga murah & diskon dari Kami. Jadwal Training Noice Control Management Bulan Januari, Februari, Maret, April, Mei, Juni, Juli, Agustus, September, Oktober, November, Desember
